Close
Print
Is recommended for:
| Make | SANDVIK TAMROCK |
| Model | 700 (Ranger Rock Pilot Surface Drills) |
| Engine | DT |
| Year | 2005- |
Application |
Recommendation |
Capacity (gal) |
|
|---|---|---|---|
|
Engine (DT)
|
|
||
|
Transfer Gearbox (Stiebel)
|
(a, b) |
|
|
|
Final Drive
|
ARCHER ALL GEAR OIL 80W-90 (c) |
|
|
|
Coolant
|
(d) |
|
|
|
Hydraulics
|
ARCHER REGULAR HYDRAULIC OIL ISO 46 (e, f) |
|
|
|
Grease Points
|
ARCHER GOLD LUBRI-PLEX 2 |
|
|
|
Central Grease System (Lincoln)
|
ARCHER GOLD LUBRI-TAC 2 |
|
|
|
Central Grease System (Safematic)
|
ARCHER GOLD LUBRI-TAC 2 (g, h) |
|
|
|
Chain Feed Gears
|
ARCHER ALL GEAR OIL 80W-90 (i) |
|
|
|
Chain Feed Planetary Gear
|
(j, k) |
|
|
|
Compressor (Gardner Denver/Tamrotor)
|
(l, m, n, o, p, q, r) |
|
|
|
Compressor (underground rig) (Hydrovane)
|
(s) |
|
|
|
Drill Rod Thread
|
(t) |
|
|
|
Rock Drill Shank
|
(u, v, w, x, y, z) |
|
|
|
Rotation Mechanisms
|
ARCHER ALL GEAR OIL 80W-90 |
|
|
|
Track Rollers & Idlers
|
|
||
|
Winch
|
ARCHER ALL GEAR OIL 80W-90 (ba) |
|
|
General Notes
| 1. | NB: Applications shown may not apply to all models. General recommendations should be read in conjunction with the specific machine build and any other special requirements of the manufacturer including serial number. |
Oil Change Intervals
Engine (DT)
| Hours Max | 250 |
Transfer Gearbox (Stiebel)
| Hours Max | 1000 |
Final Drive
| Hours Max | 1000 |
Hydraulics
| Hours Max | 2000 |
Chain Feed Gears
| Hours Max | 500 |
Chain Feed Planetary Gear
| Hours Max | 500 |
Compressor (Gardner Denver/Tamrotor)
| Hours Max | 1000 |
Rotation Mechanisms
| Hours Max | 500 |
Winch
| Hours Max | 500 |
Lubricant / Capacity Notes
| a. | Alternative recommendations, Gear oils, 2005, ISO12925-1 Type CKD, 77°F to 176°F: EP PAO 220 |
| b. | Alternative recommendations, Gear oils, 2005, ISO12925-1 Type CKD, 95°F to 140°F: EP PAO 100 |
| c. | Alternative recommendations: ARCHER GOLD SYNTHETIC GEAR OIL SAE 75W-90 |
| d. | Do not mix coolants |
| e. | Viscosity selection criteria: Optimum viscosity, 60 cSt at operating temperature. Viscosity to remain between 50-110 cSt. at operating temperature; max cold temp peak, 110-200 cSt; min hot temperature peak, 30-50 cSt. Monograde oils are preferred but multigrades can be used if viscosity criteria cannot be met in prevailing operating conditions. ISO viscosity grade according to oil operating temperature; 12°C to 26°C, 32; 21°C to 32°C, 46; 29°C to 42°C, 68; 40°C to 51°C, 100; 48°C to 59°C, 150. Synthetic oils for temperatures below -20°C. Biodegradable & environmentally compatible oils recommended to ISO 15380. |
| f. | 2005, Tamrock factory fill oil, Shell Naturelle HFE 46 or HFE 68 synthetic ester. HFD-U synthetic, organic ester fluids for hazardous conditions also approved. Factory fill Tampere Plant, Fuchs Plantoflux 68-AT-S. Factory fill Lyon Plant, Condat D68. Also approved, Quaker Quintolubric 888-68. Guarantees not valid if these oils are not used. 20°C to 41°C, HM 46, 30°C to 50°C, HM 68 |
| g. | Alternative recommendations, <32°F: GrLiE 00 |
| h. | Alternative recommendations, >32°F: ARCHER GOLD LUBRI-TAC 2 |
| i. | Alternative recommendations: ARCHER GOLD SYNTHETIC GEAR OIL SAE 75W-90 |
| j. | Alternative recommendations, Gear oils, 2005, ISO12925-1 Type CKD, 77°F to 176°F: EP PAO 220 |
| k. | Alternative recommendations, Gear oils, 2005, ISO12925-1 Type CKD, 95°F to 140°F: EP PAO 100 |
| l. | 2005, Gardner Denver/Tamrotor compressor. Mineral based engine oil or synthetic compressor oil can be used.Minimum engine oil viscosity, 7.0 cSt. If operating temperature is continuously >90°C, mineral based oil change is 300 hours or 600 hours with synthetic compressor oil |
| m. | Alternative recommendations, 2005, -22°F to 104°F: RCOS 32 |
| n. | Alternative recommendations, 2005, -4°F to 140°F: RCOS 46 |
| o. | Alternative recommendations, Compressor, 2005, -4°F to 95°F: CF 5W-20 |
| p. | Alternative recommendations, Compressor, 2005, 14°F to 86°F: CF 10W |
| q. | Alternative recommendations, Compressor, 2005, 23°F to 104°F: CF 10W-30 |
| r. | Alternative recommendations, Compressor, 2005, 32°F to 104°F: CF 20W-20 |
| s. | Preferred grade: 0°C-40°C ; -10°C-40°C |
| t. | Sandvik 795-1960 |
| u. | Alternative recommendations, Shank Lubrication, 2005, -15°F to 32°F: RD 32 |
| v. | Alternative recommendations, Shank Lubrication, 2005, 14°F to 59°F: RD 68 |
| w. | Alternative recommendations, Shank Lubrication, 2005, 41°F to 104°F: RD 100 |
| x. | Alternative recommendations, Shank Lubrication, 2005, 68°F to 122°F: RD 150 |
| y. | Alternative recommendations, Shank Lubrication, 2005, 86°F to 140°F: RD 220 |
| z. | Alternative recommendations, Shank Lubrication, 2005, 104°F to 158°F: RD 320 |
| ba. | Alternative recommendations: ARCHER GOLD SYNTHETIC GEAR OIL SAE 75W-90 |